Criteria for Accrediting Engineering Technology Programs, 2016 – 2017

Lead Society: American Institute of Aeronautics and Astronautics

Applicability
These program criteria apply to engineering technology programs that include aeronautical or similar modifiers in their titles.

Objectives
An accreditable program in Aeronautical Engineering Technology will prepare graduates with knowledge, problem solving ability, and hands-on skills to enter careers in the design, installation, manufacturing, testing, evaluation, technical sales, or maintenance of aeronautical/aerospace systems. Level and scope of career preparation will depend on the degree level and specific program orientation. Graduates of associate degree programs typically have strengths in specifying, installing, fabricating, testing, documenting, operating, selling, or maintaining basic support and manufacturing practices for aeronautical/aerospace vehicle and component support. Baccalaureate degree graduates typically have strengths in the analysis, applied design, development, implementation, or oversight of more advanced aeronautical/aerospace systems and process.

Outcomes
Each program must demonstrate that the technical, scientific, and managerial areas of expertise developed by graduates are appropriate to the technical orientation and goals of that program. Much of aeronautical/aerospace engineering technology involves the translation of engineering ideas and concepts into functioning vehicles, engines, and components. It is anticipated that the fundamental experiential skills may incorporate portions of the approved FAA Airframe and Powerplant curriculum.
Associate degree programs must demonstrate that graduates can apply the following principles to the specification, installation, fabrication, test, operation, sales, or documentation of basic aeronautical/aerospace systems:

a. Technical expertise in a minimum of three subject areas chosen from: engineering materials, applied structures, applied mechanics, applied aerodynamics, applied propulsion, and fundamentals of electricity.

b. Technical expertise in assembly and support processes, industry standards, regulations and documentation, and computer-aided engineering graphics with added technical depth in at least one of these areas.

c. Expertise in applied physics having an emphasis in applied mechanics and other technical topics in physics appropriate to the program objectives.

Baccalaureate degree programs must demonstrate that graduates can apply the following concepts to the analysis, development, implementation, or oversight of aeronautical/aerospace systems and processes:

a. Technical expertise in engineering materials, statics, strength of materials, applied aerodynamics, applied propulsion, and either electrical power or electronics.

b. Technical expertise having added depth in a minimum of three subject areas chosen from: manufacturing processes, vehicle design and modification, engineering materials, electro-mechanical devices and controls, industrial operations, and systems engineering including the appreciation of the engineering design cycle and the system life cycle relating to the manufacture and maintenance of aeronautical/aerospace vehicles and their components.

c. Expertise in applied physics having an emphasis in applied mechanics, plus added technical topics in physics and other science principles appropriate to the program objectives.

Lead Society: American Society of Heating, Refrigeration and Air-Conditioning Engineers

Applicability
These program criteria apply to engineering technology programs that include air conditioning, HVAC, refrigerating, heating, or ventilating, or similar modifiers in their titles.

Objective
An accreditable program in Air Conditioning, Refrigerating, Heating and Ventilating Engineering Technology will prepare graduates with the technical and managerial skills necessary to enter careers in the design, application installation, manufacturing, operation, marketing and maintenance of heating, ventilating, air-conditioning, and refrigeration (HVAC&R) systems. Graduates of associate degree programs typically have competence in air-conditioning processes, heating/cooling load calculations, ventilation principles, pipe and duct design, system controls, system components, heating, refrigeration, economic analysis and computerized energy evaluation methods. Baccalaureate degree graduates are well prepared for design and development of complex systems complementing and expanding on lower division work.

Outcomes
Graduates of associate degree programs must demonstrate knowledge and hands-on competence appropriate to the goals of the program in:

a. utilizing air-conditioning processes, heating and cooling load calculations, ventilation principles, pipe and duct design, system controls, system components, heating, refrigeration, economic analysis, and computerized energy evaluation methods in system design.

b. applying mathematics, physics or chemistry, thermodynamics, psychrometrics, and fluid mechanics to HVAC&R systems

Graduates of baccalaureate degree programs must demonstrate, in addition to outcomes expected of associate degree graduates, the ability to:

c. analyze and design complex HVAC&R systems.

d. apply project management to HVAC&R systems.

e. apply economic analysis and computerized energy evaluation methods to HVAC&R systems.

Lead Society: American Society of Civil Engineers

Applicability
These program criteria apply to engineering technology programs that include architectural or similar modifiers in their title.

Objective

Graduates of Architectural Engineering Technology programs will have the technical and managerial skills necessary to enter careers in the planning, design, construction, operation or maintenance of the built environment.  Graduates of associate degree programs are prepared for careers in the construction, testing, operation, and maintenance of building systems; they have the abilities to produce and utilize basic construction documents and to perform basic analysis and design of system components.  Baccalaureate degree graduates are prepared for careers in which they will analyze and design systems, specify project methods and materials, perform cost estimates and analyses, and manage technical activities in support of architectural projects.

Outcomes

Graduates of associate degree programs will, to the extent required to meet Program Educational Objectives:

a.   employ concepts of architectural theory and design in a design environment;

b.   utilize instruments, methods, software, and techniques that are appropriate to produce A/E documents and presentations;

c.   utilize measuring methods that are appropriate for field, office, or laboratory;

d.   apply fundamental computational methods and elementary analytical techniques in sub-disciplines related to architectural engineering;

In addition graduates if baccalaureate degree programs will, to the extent required to meet Program Educational Objectives:

e. create, utilize, and present design, construction, and operations documents;

f. perform economic analyses and cost estimates related to design, construction, and maintenance of building systems;

g. select appropriate materials and practices for building construction;

h. apply principles of construction law and ethics in architectural practice, and;

i. perform standard analysis and design in at least one recognized technical specialty within architectural engineering technology that is appropriate to the goals of the program.

Lead Society: SAE, International

Applicability
These program criteria apply to engineering technology programs that include automotive or similar modifiers in their title. The term “automotive” refers to land, sea, air, or space mobility.

Objective
An accreditable program will prepare graduates with technical and managerial skills necessary to enter careers in design, manufacturing, marketing, operation, and maintenance in the field of automotive engineering technology. Graduates of associate degree programs are expected to have strengths in their knowledge of operations, maintenance, and manufacturing, while baccalaureate degree graduates are expected to be prepared for design and management in the automotive field.

Outcomes
The nature and level of proficiency demonstrated by graduates in the outcomes prescribed below must be appropriate to the program objectives.

The field of automotive engineering technology is dependent on the application of computers in analysis, design, manufacturing, and operation of facilities. The program must demonstrate that graduates are competent in the application of computer technologies commonly used in industry, governmental service, and private practice associated with land, sea, air, and space mobility.

Graduates must demonstrate proficiency in the application of probability and statistics to the solution of problems related to land, sea, air, and space mobility.

In the field of automotive engineering technology, management and technology are often inextricably intertwined. The program must demonstrate that graduates have acquired the ability to apply modern and effective management skills in identification and investigation of problems, analysis of data, synthesis and implementation of solutions, and operations of facilities related to land, sea, air, and space mobility.

The program must demonstrate that graduates have a working knowledge of the design, manufacture, and maintenance of major subsystems and technologies associated with land, sea, air, and space mobility.

Lead Society: Association for the Advancement of Medical Instrumentation
Cooperating Societies: American Ceramic Society
American Institute of Chemical Engineers,
American Society of Agricultural and Biological Engineers,
American Society of Mechanical Engineers,
Institute of Electrical and Electronics Engineers

Applicability
These program criteria apply to engineering technology programs that include bioengineering, biomedical, medical electronics, biomedical equipment, or similar modifiers in their titles.

Objective
An accreditable program in Bioengineering Technology will prepare graduates with the technical skills necessary to enter careers in the design, application, installation, operation and/or maintenance of biomedical equipment. Graduates of associate degree programs typically have strengths in the building, testing, operation, and maintenance of existing biomedical equipment or systems, whereas baccalaureate degree graduates are well prepared for development and implementation of biomedical equipment or systems.

Outcomes
Graduates of associate degree programs must demonstrate knowledge and hands-on competence appropriate to the goals of the program in:

a. the application of circuit analysis and design, analog and digital electronics, microcomputers, bioengineering systems, and safety in the building, testing, operation, and maintenance of biomedical equipment.

b. the applications of physics, chemistry, and biological sciences to building, testing, operation, and maintenance of biomedical equipment in a rigorous mathematical environment at or above the level of algebra and trigonometry.

In addition to the above, graduates of baccalaureate degree programs must demonstrate:

c. the ability to analyze, design, and implement bioengineering systems.

d. the ability to utilize statistics/probability, transform methods, discrete mathematics, or applied differential equations in support of bioengineering systems.

e. an understanding of the clinical application of biomedical equipment.

Lead Society: American Institute of Chemical Engineers

Applicability
These program criteria apply to engineering technology programs that include chemical, process, plant, or similar modifiers in their titles.

Objective
An accreditable program will prepare graduates with the technical and managerial skills necessary to enter careers in design, manufacturing, marketing, operation, and maintenance in the field of chemical engineering technology. Graduates of baccalaureate degree programs typically have strengths in their knowledge of laboratory applications, design, technical service and supervision. Graduates of associate degree programs typically have strengths in their knowledge of operations, maintenance, and manufacturing.

Outcomes
The field of chemical engineering technology is dependent upon the application of chemistry in an industrial setting. The program must demonstrate that graduates have a working knowledge and ability to solve technical problems by the industrial application of inorganic chemistry, organic chemistry, analytical chemistry; physics, and process stoichiometry. The program must also demonstrate that graduates of the baccalaureate program possess a deeper and broader knowledge which enables them to solve technical and managerial problems of a more complex nature than those expected of graduates of associate degree programs.

In the field of chemical engineering technology, the operation of chemical processes is extremely important. The program must demonstrate that graduates have the ability to apply:

a. The concepts of chemical engineering unit operations such as mass transfer, heat transfer, distillation, and evaporation to the design, operation, and maintenance of chemical processes,

b. The principles of thermodynamics; process control and instrumentation, computer applications, and materials science to the design, operation, and maintenance of chemical processes.

The nature and level of proficiency must be appropriate to the program objectives.

In the field of chemical engineering technology, the various fields of the chemical sciences and the operation of industrial chemical process equipment are often inextricably intertwined. The program must demonstrate that graduates have the ability to operate, test, and check out chemical process equipment in accordance with appropriate safety, health and environmental considerations and regulations.

Lead Society: American Society of Civil Engineers

Applicability
These program criteria apply to engineering technology programs that include civil or similar modifiers in their title.

Objective

Graduates of Civil Engineering Technology programs will have the technical and managerial skills necessary to enter careers in the planning, design, construction, operation or maintenance of the built environment and global infrastructure.  Graduates of associate degree programs have skills in construction testing, operation, and maintenance of buildings and infrastructure and the ability to produce and utilize basic construction documents and perform basic analysis and design of system components.  Graduates of  baccalaureate degree programs are prepared to analyze and design systems, specify project methods and materials, perform cost estimates and analyses, and manage technical activities in support of civil engineering projects.

Outcomes

Graduates of associate degree programs will, to the extent required to support Program Educational Objectives:

a.   utilize principles, hardware, and software that are appropriate to produce drawings, reports, quantity estimates, and other documents related to civil engineering;

b.   conduct standardized field and laboratory tests related to civil engineering;

c.   utilize surveying methods appropriate for land measurement and/or construction layout;

d.   apply fundamental computational methods and elementary analytical techniques in sub-disciplines related to civil engineering.

In addition, graduates of baccalaureate degree programs will, to the extent required to support Program Educational Objectives:

e. plan and prepare documents appropriate for design and construction;

f. perform economic analyses and cost estimates related to design, construction, operations and  maintenance of systems associated with civil engineering;

g. select appropriate engineering materials and practices, and;

h. perform standard analysis and design in at least three sub-disciplines related to civil engineering.

Lead Society: Institute of Electrical and Electronics Engineers
Cooperating Society: Institute of Industrial Engineers

Applicability

These program criteria apply to engineering technology programs that include computer or similar modifiers in their titles.

Objective

An accreditable program in Computer Engineering Technology will prepare graduates with the skills necessary to enter careers in the design, application, installation, operation, and/or maintenance of computer systems.  Graduates of associate degree programs typically have strengths in the building, testing, operation, and maintenance of existing computer systems and their associated software systems, whereas baccalaureate degree graduates are well prepared for development and implementation of computer systems.

Outcomes

Graduates of associate degree programs must demonstrate knowledge and hands-on competence appropriate to the objectives of the program in:

a. the application of electric circuits, computer programming, associated software applications, analog and digital electronics, microcomputers, operating systems, local area networks, and engineering standards to the building, testing, operation, and maintenance of computer systems and associated software systems; and

b. the application of natural sciences and mathematics at or above the level of algebra and trigonometry to the building, testing, operation, and maintenance of computer systems and associated software systems.

Given the breadth of technical expertise involved with computer systems, and the unique objectives of individual programs, some baccalaureate programs may focus on preparing graduates with in-depth but narrow expertise, while other programs may choose to prepare graduates with expertise in a broad spectrum of the field. Therefore, the depth and breadth of expertise demonstrated by baccalaureate graduates must be appropriate to support the objectives of the program.  In addition to the outcomes expected of associate degree graduates, graduates of baccalaureate degree programs must demonstrate:

c. the ability to analyze, design, and implement hardware and software computer systems;

d. the ability to apply project management techniques to computer systems; and

e. the ability to utilize statistics/probability, transform methods, discrete mathematics, or applied differential equations in support of computer systems and networks.

Lead Society: American Society of Civil Engineers

Applicability
These program criteria apply to engineering technology programs that include construction or similar modifiers in their title.

Objective
Graduates of Construction Engineering Technology programs will have the technical skills necessary to enter careers in construction, operation and/or maintenance of the built environment and global infrastructure.  Graduates of associate degree programs have skills in the construction, testing, operation, and maintenance of buildings and infrastructure;  they also have the ability to utilize basic construction documents to participate in construction activities. Graduates of baccalaureate degree programs are prepared to specify project methods and materials, perform cost estimates and analyses, and manage construction activities.

Outcomes
Graduates of associate degree programs will, to the extent required to meet Program Educational Objectives:

a.   utilize techniques that are appropriate to administer and evaluate construction contracts, documents, and codes;

b.   estimate costs, estimate quantities, and evaluate materials for construction projects;

c.   utilize measuring methods, hardware, and software that are appropriate for field, laboratory, and office processes related to construction;

d.   apply fundamental computational methods and elementary analytical techniques in sub-disciplines related to construction engineering.

In addition, graduates of baccalaureate degree programs will, to the extent required to meet the Program Educational Objectives:

e. produce and utilize design, construction, and operations documents;

f. perform economic analyses and cost estimates related to design, construction, and maintenance of systems associated with construction engineering;

g. select appropriate construction materials and practices;

h. apply appropriate principles of construction management, law, and ethics, and;

i. perform standard analysis and design in at least one sub-discipline related to construction engineering.

Lead Society: American Society of Mechanical Engineers
Cooperating Society: Society of Manufacturing Engineers

Applicability
These program criteria apply to engineering technology programs with an emphasis on mechanical components and systems, that include drafting/design or similar modifiers in their titles.

Objective
An accreditable program in Drafting/Design Engineering Technology will prepare graduates with knowledge, problem solving ability, and hands on skills to enter careers in drafting and basic design of mechanical components and systems. Graduates of associate degree programs shall have competency in drafting, including at least one commercial CAD software package appropriate to the program objectives. Baccalaureate degree graduates are prepared with the knowledge, skills, and abilities to enter careers in applied mechanical design.

Outcomes
Graduates of associate degree programs must demonstrate knowledge and technical competency appropriate to the objectives of the program in:

a. engineering materials, applied mechanics, and manufacturing methods.

b. applied drafting practice emphasizing mechanical components and systems, as well as fundamentals of descriptive geometry, orthographic projection, sectioning, tolerancing and dimensioning, and basic computer aided drafting and design with technical depth in at least one of these areas.

c. the application of physics and engineering materials having an emphasis in applied mechanics, or in-depth application of physics having emphasis in mechanical components and design.

Graduates of baccalaureate degree programs, in addition to outcomes required of associate degree graduates, must demonstrate competency in the application of manuals, handbooks, material and/or equipment specifications, and related software in advanced drafting/design. Competency in the application of current codes and standards must be demonstrated with open-ended design experiences that integrate materials, manufacturing, design analysis, or graphics. Understanding of concepts relating to the environmental and economic impacts of design must also be demonstrated. Graduates must also demonstrate competency in:

d. design of machine elements, advanced drafting including current three dimensional computer representations as related to mechanical design, and manufacturing methods. Advanced proficiency must be demonstrated in at least three drafting / design related areas, consistent with the technical orientation of the program.

e. the in-depth application of physics and engineering materials having emphasis in drafting, manufacturing, and design of mechanical components.

Lead Society: Institute of Electrical and Electronics Engineers

Applicability
These program criteria apply to engineering technology programs that include electrical or electronic(s) or similar modifiers in their titles.

Objective

An accreditable program in Electrical/Electronic(s) Engineering Technology will prepare graduates with the skills necessary to enter careers in the design, application, installation, manufacturing, operation and/or maintenance of electrical/electronic(s) systems.  Graduates of associate degree programs typically have strengths in the building, testing, operation, and maintenance of existing electrical systems, whereas baccalaureate degree graduates are well prepared for development and implementation of electrical/electronic(s) systems.

Outcomes

Graduates of associate degree programs must demonstrate knowledge and hands-on competence appropriate to the objectives of the program in:

a. the application of circuit analysis and design, computer programming, associated software, analog and digital electronics, and microcomputers, and engineering standards to the building, testing, operation, and maintenance of electrical/electronic(s) systems; and

b. the application of natural sciences and mathematics at or above the level of algebra and trigonometry to the building, testing, operation, and maintenance of electrical/electronic systems.

Given the breadth of technical expertise involved with electrical systems, and the unique objectives of individual programs, some baccalaureate programs may focus on preparing graduates with in-depth but narrow expertise, while other programs may choose to prepare graduates with expertise in a broad spectrum of the field. Therefore, the depth and breadth of expertise demonstrated by baccalaureate graduates must be appropriate to support the objectives of the program. In addition to the outcomes expected of associate degree graduates, graduates of baccalaureate degree programs must demonstrate:

c. the ability to analyze, design, and implement one or more of the following: control systems, instrumentation systems, communications systems, computer systems, or power systems;

d. the ability to apply project management techniques to electrical/electronic(s) systems; and

e. the ability to utilize differential and integral calculus, as a minimum, to characterize the performance of electrical/electronic systems.

Lead Society: Institute of Electrical and Electronics Engineers
Cooperating Society: American Society of Mechanical Engineers
and International Society of Automation

Applicability
These program criteria apply to engineering technology programs that include electromechanical or similar modifiers in their title.

Objective
An accreditable associate degree program in electromechanical engineering technology will typically prepare graduates with the technical skills necessary to enter careers in the building, installation, application, and operation and/or maintenance of electromechanical hardware and software systems. An accreditable baccalaureate degree program in electromechanical engineering technology will typically prepare graduates for applied design, development, and management of electromechanical systems.

Outcomes
The field of electromechanical engineering technology depends heavily on the integration of electrical, mechanical, computer, and network components to the design, application, operation, and maintenance of electromechanical systems.

Accordingly, graduates of associate degree programs must demonstrate knowledge and technical competency, appropriate to the objectives of the program, to:

a. Use computer-aided drafting or design tools to prepare graphical representations of electromechanical systems.

b. Use circuit analysis, analog and digital electronics, basic instrumentation, and computers to aid in the characterization, analysis, and troubleshooting of electromechanical systems; and

c. Use statics, dynamics (or applied mechanics), strength of materials, engineering materials, engineering standards, and manufacturing processes to aid in the characterization, analysis, and troubleshooting of electromechanical systems.

Given the breadth of technical expertise involved with electromechanical systems, and the unique objectives of individual programs, some baccalaureate programs may focus on preparing graduates with in-depth but narrow expertise, while other programs may choose to prepare graduates with expertise in a broad spectrum of the field. Therefore, the depth and breadth of expertise demonstrated by baccalaureate graduates must be appropriate to support the objectives of the program. In addition to the outcomes required of associate degree graduates, graduates of baccalaureate degree programs must demonstrate:

d. Use appropriate computer programming languages for operating electromechanical systems;

e. Use electrical/electronic devices such as amplifiers, motors, relays, power systems, and computer and instrumentation systems for applied design, operation, or troubleshooting electromechanical systems;

f. Use advanced topics in engineering mechanics, engineering materials, and fluid mechanics for applied design, operation, or troubleshooting of electromechanical systems;

g. Use basic knowledge of control systems for the applied design, operation, or troubleshooting of electromechanical systems;

h. Use differential and integral calculus, as a minimum, to characterize the static and dynamic performance of electromechanical systems; and

i. Use appropriate management techniques in the investigation, analysis, and design of electromechanical systems.

Lead Society: American Society for Engineering Education

These program criteria apply to engineering technology programs without modifiers in their titles.

There are no program-specific criteria beyond the General Criteria.

Lead Society: American Academy of Environmental Engineers
Cooperating Societies: American Institute of Chemical Engineers;
American Society of Civil Engineers;
American Society of Heating, Refrigerating, and Air Conditioning Engineers;
American Society of Mechanical Engineers;
SAE International;
Society of Mining, Metallurgy, and Exploration

Applicability
These program criteria apply to engineering technology programs that include environmental or similar modifiers in their title.

Objective
The field of environmental engineering technology is broad, ranging from laboratory measurements to field measurements to system design and operation. An accreditable Environmental Engineering Technology program will prepare graduates to work in one or more specialties as described by the program objectives. Graduates shall understand the roles and responsibilities of public and private organizations pertaining to environmental regulations. Graduates are prepared to apply the concepts of professional practice and assist in project management.  Graduates of associate degree programs typically have competence in applied skills, while baccalaureate degree graduates have a deeper understanding and competence in the application of engineering principles to problem solving and to the design of engineered systems; and the application of mathematics, physics, chemistry, and biology to the field.

Outcomes
The field of environmental engineering technology includes environmental measurements and the design, management, and operation of environmental facilities and systems. Associate degree programs must demonstrate that graduates are capable of:
a. Conducting sampling of environmental media;

b. Performing field and laboratory measurements of environmental parameters, including use of common instruments and equipment appropriate to environmental technology;
c. Applying quality control methods in sampling and measurement and utilizing basic statistical techniques in analysis of the results;

d. Preparing reports to adequately describe results of environmental sampling and measurement;

e. Explaining operating principles of a range of unit processes for environmental control; and

f. Performing CAD and GIS operations and applying them to solving engineering problems.
Baccalaureate degree programs must demonstrate that graduates, in addition to the outcomes expected of associate degree graduates, are capable of:

g. Applying probability and statistics to measured data and performing risk analyses;

h. Formulating flow and material balances;

i. Applying principles of biology, chemistry, and physics to situations relevant to the program objectives; and

j. Designing basic unit processes for pollution prevention and waste treatment.

Lead Society: Society of Fire Protection Engineers

Applicability
These program criteria apply to engineering technology programs that include fire protection and similar modifiers in their title.

Objective
An accreditable Fire Protection Engineering Technology program will prepare graduates to work in one or more of the areas of fire protection engineering technology including fire protection analysis, knowledge of codes and standards, fire science and human behavior, fire protection systems, and passive building systems and construction as they relate to fire protection. Graduates of associate degree programs typically will have knowledge in the areas of fire science, fire suppression and detection systems, fire protection hydraulics, and fire prevention. Baccalaureate degree graduates, in addition to the knowledge required in associate degree programs, will be able to apply the basics of fire protection engineering technology to practical environments involving the fire safety of buildings and occupants.

Outcomes
Graduates shall have competence in the application of mathematics and physical sciences to human behavior and response to fire for the field. Also, they shall understand the concepts of ethical professional practice and the roles and responsibilities of public institutions and private organizations pertaining to fire protection engineering technology.

Graduates of associate degree programs must demonstrate knowledge and technical competency appropriate to the objectives of the program to:

a. basic fire science;

b. fire suppression, and detection systems;

c. inspection, testing and maintenance of fire suppression and detection systems;

d. fire prevention and mitigation; and

e. fire protection hydraulics and water supply analysis.

Graduates of baccalaureate degree programs, in addition to the outcomes required of associate degree graduates and appropriate to the objectives of the program must also demonstrate competency in:

f. anticipating, recognizing and evaluating fire hazards;

g. fire science and human behavior;

h. conducting fire risk analysis;

i. design and analysis of fire suppression and detection systems;

j. formulating fire control and fire hazard mitigation strategies;

k. maintaining program and system effectiveness;

l. applying applicable codes and standards;

m. hazardous materials chemistry; and

n. demonstrating an understanding of forensic investigation including associated legal responsibilities and recordkeeping.

Lead Society: Institute of Industrial Engineers

Applicability
These program criteria apply to engineering technology programs that include industrial or similar modifiers in their titles.

Objective
An accreditable program in Industrial Engineering Technology will prepare graduates with the technical and managerial skills necessary to develop, implement, and improve integrated systems that include people, materials, information, equipment, and energy. Graduates at the associate level will be prepared for immediate employment, but will also be prepared to continue in baccalaureate studies in industrial engineering technology and related upper level studies. Graduates at the baccalaureate level will be prepared for careers in higher levels of system design, integration, and management.

Outcomes
Graduates must demonstrate the ability to accomplish the integration of systems using appropriate analytical, computational, and application practices and procedures.

Graduates at the baccalaureate level must demonstrate the ability to apply knowledge of probability, statistics, engineering economic analysis and cost control, and other technical sciences and specialties necessary in the field of industrial engineering technology.

Lead Society: Institute of Electrical and Electronics Engineers
Cooperating Society: CSAB

Applicability
These program criteria apply to engineering technology programs that include information and similar modifiers in their titles. The program title must include the words “engineering technology.”

Objective
An accreditable program in Information Engineering Technology will prepare graduates with the skills necessary to enter careers in the design, application, installation, operation and/or maintenance of computer systems, networks, and telecommunications systems dedicated to the processing and transfer of information. Graduates of associate degree programs typically have strengths in the building, testing, operation, and maintenance of existing hardware and software systems, whereas baccalaureate degree graduates normally are well prepared for design, development, and management.

Outcomes
The field of Information Engineering Technology depends heavily on the application of computer and network components for use in the processing, analysis, and transfer of information. Accordingly:

Graduates of associate degree programs must demonstrate knowledge and hands-on competence appropriate to the objectives of the program in:

a. the application of computer and network hardware, operating systems, system and network administration, programming languages, applications software, and databases in the building, testing, operation, and maintenance of hardware and software systems; and

b. the application of electrical, electronic, telecommunications, and digital signal propagation fundamentals in the building, testing, operation, and maintenance of hardware and software systems.

Given the breadth of technical expertise involved with information systems, and the unique objectives of individual programs, some baccalaureate programs may focus on preparing graduates with in-depth but narrow expertise, while other programs may choose to prepare graduates with expertise in a broad spectrum of the field. Therefore, the depth and breadth of expertise demonstrated by baccalaureate graduates must be appropriate to support the objectives of the program. In addition to outcomes expected of associate degree graduates, graduates of baccalaureate degree programs must demonstrate:

c. the ability to design, implement, maintain and provide for the security of facilities involved with the processing and transfer of information;

d. the ability to apply project management techniques to facilities that process and transfer information; and

e. the ability to apply discrete mathematics, and probability and statistics in the support of facilities that process and transfer information.

Lead Society: International Society of Automation

Applicability
These program criteria apply to engineering technology programs that include instrumentation, measurement, metrology, control, robotics, automation, or similar modifiers in their titles.

Objective
An accreditable program in instrumentation and control systems engineering technology will prepare graduates with the technical and managerial skills necessary to enter careers in design, manufacturing, marketing, operations, and maintenance in the fields of measurement, control, robotics, and automation engineering technology. Graduates of associate degree programs, as a result of extensive laboratory experience in component/device operation, calibration and interconnection, have strengths in their knowledge of operations, maintenance, and manufacturing. Baccalaureate degree graduates are qualified to undertake the design and specification of control systems and for the subsequent management of their installation and operation.

Outcomes
The field of instrumentation and control systems engineering technology is heavily dependent on the application of computers in the analysis, design, and operation of manufacturing and processing facilities. The program must demonstrate that graduates have the ability to:

a. apply concepts of automatic control, including measurement, feedback and feedforward regulation for the operation of continuous and discrete systems,

b. design and implement systems utilizing analog and/or digital control devices,

c. apply the concepts of chemistry, physics, and electricity/electronics to measurement and control systems,

d. apply the concepts of digital and microprocessor systems and functionality of system components/devices for the automation of processes,
e. apply the concepts of measurements and sensor selection, and

f. communicate the technical details of control systems using current techniques and graphical standards.

In addition, baccalaureate graduates must demonstrate the ability to

g. apply the concepts of mechanics, fluid mechanics, and heat transfer to the design of process control systems, and

h. understand and utilize programmable logic controllers (PLC), distributed control systems (DCS) and supervisory control systems for control of manufacturing and processing systems.

Mathematics forms the basis for design, synthesis and analysis in the field of instrumentation and control engineering technology. Associate degree graduates must demonstrate the ability to apply algebra, trigonometry, and elementary calculus in the installation, calibration and trouble-shooting of control systems. Baccalaureate graduates must demonstrate proficiency in the utilization of differential and integral calculus and ordinary differential equations in the design, analysis, and performance assessment of control systems.

In the field of instrumentation and control engineering technology, management and technology are often inextricably intertwined. Therefore

a. associate degree graduates must demonstrate the ability to recognize and apply the fundamental concepts of economics and management to problems in automatic control systems, and

b. baccalaureate degree graduates must demonstrate the ability to utilize modern and effective management skills for performing investigation, analysis, and synthesis in the implementation of automatic control systems.

Lead Society: Society of Manufacturing Engineers

Applicability
These program criteria apply to engineering technology programs that include manufacturing or similar modifiers in their titles.

Objective
An accreditable baccalaureate degree program in manufacturing engineering technology will prepare graduates with technical and leadership skills necessary for manufacturing competitiveness and to enter careers in manufacturing process and systems design, operations, quality, continuous improvement, lean manufacturing, and sustainability. Graduates of associate degree programs typically have careers in manufacturing operations and service functions.

Outcomes
Graduates must demonstrate the ability to apply the following to the solution of manufacturing programs to achieve manufacturing competitiveness: (a) materials and manufacturing processes; (b) product design process, tooling, and assembly; (c) manufacturing systems, automation, and operations; (d) statistics, quality and continuous improvement, and industrial organization and management.

Graduates of baccalaureate degree programs must have a capstone or integrating experience that develops and illustrates student competencies in applying both technical and non-technical skills in successfully solving manufacturing problems.

Lead Society: Society of Naval Architects and Marine Engineering

Applicability 
These program criteria apply to engineering technology programs that include marine or similar modifiers in their titles.

Objective
An accreditable program will prepare graduates with the technical and managerial skills necessary to enter a variety of different careers in the field of marine engineering technology. Graduates of associate degree programs must have strengths in their knowledge of operations, maintenance, and manufacturing, while baccalaureate degree graduates must also be well prepared for design and management in marine engineering technology.

Outcomes
The field of marine engineering technology is dependent on the application of the technical sciences to marine equipment, systems, and vehicles.

The program must demonstrate that the baccalaureate degree graduates are proficient in applying the principles of college-level physics and chemistry to problems associated with marine equipment, systems and vehicles. The program must demonstrate that associate degree graduates are proficient in applying the principles of college-level physics to problems associated with marine equipment, systems and vehicles. The nature and level of proficiency must be appropriate to the program objectives.

The program must demonstrate that graduates are proficient in applying the principles of fluid mechanics, hydrostatic stability, solid mechanics, materials, dynamics, and energy systems to marine equipment, systems and vehicles. The nature and level of proficiency must be appropriate to the program objectives.

Knowledge of modern instrumentation and proper laboratory practices is important in the field of marine engineering technology. The program must demonstrate that graduates are proficient in (a) the use and application of instrumentation for measuring physical phenomena related to naval architecture and/or marine engineering technology, and (b) the design of experiments, data collection, analysis, and formal report writing.

The program must demonstrate that graduates are proficient in the operation, maintenance, analysis, and management of modern marine power plants and associated marine auxiliary equipment and systems. The program must also demonstrate that graduates are proficient in the use of design manuals, material/equipment specifications, and industry regulations applicable to marine engineering technology. The nature and level of proficiency must be appropriate to the program objectives.

Lead Society: American Society of Mechanical Engineers

Applicability
These program criteria apply to engineering technology programs that include mechanical or similar modifiers in their titles.

Objective

An accreditable program in Mechanical Engineering Technology prepares graduates with knowledge, problem solving ability, and hands-on skills to enter careers in the design, installation, manufacturing, testing, technical sales, maintenance, and other endeavors typically associated with mechanical components and systems.  Programs emphasize how things actually work, how they are made, and the realization that most mechanical components and assemblies become parts of complex systems, a consideration realized at the beginning of the design process.

Level and scope of career preparation will depend on the degree level and specific program orientation.  Graduates of associate degree programs have strengths in specifying, installing, building, testing, documenting, operating, selling, or maintaining basic mechanical systems, whereas baccalaureate degree graduates build on the strengths of the associate degree program by gaining proficiency in the analysis, applied design, development, implementation, or oversight of more advanced mechanical components, systems, and processes.

Outcomes

Associate degree programs prepare graduates for entry into industry as engineering technicians or for transfer to a baccalaureate degree program.  Depth in, and selection of, specific technical areas within a degree program may vary based on program intent and should be validated by the programs constituents.  All programs, however, must demonstrate graduates’ knowledge and hands-on competency in these specific topic areas, unless the program’s faculty and primary constituents approve the substitution of other specific, mechanically-related technical subjects.

a. geometric dimensioning and tolerancing; computer aided drafting and design; and a basic knowledge and familiarity with industry codes, specifications, and standards;

b. selection, set-up, and calibration of instrumentation and the preparation of laboratory reports and systems documentation associated with the development, installation, or maintenance of mechanical components and systems;

c. basic engineering mechanics.

An associate degree program must have an integrating or capstone experience which utilizes the skills acquired.

For baccalaureate programs, given the breadth of technical expertise involved with mechanical systems and the unique objectives of individual programs, programs may focus on preparing graduates with in-depth but narrow expertise, while other programs may choose to prepare graduates with expertise in a broad spectrum of the field.  Therefore the depth and breadth of expertise demonstrated by baccalaureate graduates must be appropriate to support the program’s educational objectives.

In addition to the outcomes expected of associate degree program graduates, baccalaureate degree program graduates must demonstrate knowledge and competency in the following topic areas unless the program’s faculty and primary constituents approve the substitution of other specific mechanically-related technical subjects:

d. differential and integral calculus;

e. manufacturing processes; material science and selection; solid mechanics (such as statics, dynamics, strength of materials, etc.) and mechanical system design;

f. thermal sciences, such as thermodynamics, fluid mechanics, heat transfer, etc.;

g. electrical circuits (ac and dc), and electronic controls; and

h. application of industry codes, specifications, and standards; and using technical communications, oral and written, typical of those required to prepare and present proposals, reports, and specifications.

The capstone experience, ideally multidisciplinary in nature, must be project based and include formal design, implementation and test processes.

Lead Society: American Nuclear Society

Applicability
These program criteria apply to engineering technology programs that include nuclear or similar modifiers in their titles.

Objective
An accredited program in Nuclear Engineering Technology will prepare graduates with knowledge, skills, and problem-solving abilities required to enter careers in those parts of the nuclear industry served by the program. Graduates of programs in nuclear engineering technology will have strengths in the areas of nuclear processes and operations, nuclear systems, and radiological safety, developed from an understanding of the fundamental principles, conservation laws, and rate processes of the physical sciences, and the importance of the safe operation of nuclear systems.

Outcomes
An associate degree program must demonstrate that graduates have acquired the following capabilities:

a. An understanding of nuclear systems and operations, and radiological safety, including

1. radiation protection procedures,

2. currently applicable rules and regulations, maintenance, control, performance, the human interface in operations, and quality assurance pertaining to the operation of nuclear systems, and

3. the importance of the safe operation of nuclear systems.

b. An ability to solve problems using foundation mathematics and the fundamental principles, conservation laws, and rate processes of the physical sciences that are commonly encountered in the segment of the nuclear industry served by the program.

c. An ability to conduct, analyze, and interpret laboratory experiments, and to interpret laboratory analyses that measure nuclear and radiation processes.

A baccalaureate degree program must demonstrate that graduates have acquired the capabilities specified above and the following capabilities:

d. An ability to apply advanced mathematics, including differential/integral calculus, to the solution of problems commonly encountered in the segment of the nuclear industry served by the program.

e. An understanding of the design processes for nuclear systems used in the segment of the nuclear industry served by the program.

Lead Society: National Society of Professional Surveyors
Cooperating Society: American Society of Civil Engineers

Applicability
These program criteria apply to engineering technology programs that include surveying, geomatics, or similar modifiers in their title.

Objective
An accreditable program in Surveying/Geomatics Engineering Technology will prepare graduates with the technical skills necessary to enter careers in boundary and/or land surveying, geographic and/or land information systems, engineering project surveying, photogrammetry, mapping and geodesy, remote sensing, or other related areas. The level and scope of career preparation will depend on the degree level and specific program orientation. Graduates of associate degree programs typically have strengths in utilizing measurement technologies and field mapping, and possess the ability to interpret basic land records and prepare maps and plats; whereas baccalaureate degree graduates possess a stronger background in geodetic science, photogrammetry and remote sensing, and data analysis, and are prepared to design and select appropriate measurement systems, analyze positional accuracy in conformance with appropriate standards, prepare land records and plats to meet legal requirements, and manage surveying/geomatics activities.

Outcomes
Associate degree programs must demonstrate that graduates are capable of:

a. Utilizing modern measurement technologies to acquire spatial data;

b. Employing industry-standard software to solve technical problems;

Baccalaureate degree programs must demonstrate that graduates, in addition to the competencies above, are capable of:

c. Applying technical concepts to the design of measurement systems to meet project requirements;

d. Analyzing data for conformance with precision and accuracy requirements;

e. Performing standard analysis and design in at least one of the recognized technical specialties within surveying/geomatics technology that are appropriate to the goals of the program. The specialties include boundary and/or land surveying geographic and/or land information systems, engineering project surveying, photogrammetry, mapping and geodesy, and other related areas.

Lead Society: Institute of Electrical and Electronics Engineers

Applicability
These program criteria apply to engineering technology programs that include telecommunications or similar modifiers in their titles.

Objective

An accreditable program in Telecommunications Engineering Technology will prepare graduates with the skills necessary to enter careers in the design, application, installation, management, operation, and/or maintenance of telecommunication systems.  Graduates of associate degree programs typically have strengths in the building, testing, operation, and maintenance of existing telecommunications systems, whereas baccalaureate degree graduates are well prepared for development and implementation of telecommunications systems.

Outcomes

Graduates of associate degree programs must demonstrate knowledge and hands-on competence appropriate to the objectives of the program in:

a. the application of electric circuits, computer programming, associated software, analog and digital electronics, voice and data communications, engineering standards, and the principles of telecommunications systems in the solution of telecommunications problems; and

b. the application of natural sciences and mathematics at or above the level of algebra and trigonometry to building, testing, operation, and maintenance of telecommunications systems.

Given the breadth of technical expertise involved with telecommunication systems, and the unique objectives of individual programs, some baccalaureate programs may focus on preparing graduates with in-depth but narrow expertise, while other programs may choose to prepare graduates with expertise in a broad spectrum of the field. Therefore, the depth and breadth of expertise demonstrated by baccalaureate graduates must be appropriate to support the objectives of the program. In addition to the outcomes expected of associate degree graduates, graduates of baccalaureate degree programs must demonstrate:

c. the ability to analyze, design, and implement telecommunications systems;

d. the ability to apply project management techniques in the design, maintenance, and implementation of telecommunication systems;

e. the ability to analyze and implement switching technologies, wide area networking technologies, and policy;

f. the ability to manage, design, and plan wide area networks; and

g. the ability to utilize statistics/probability, transform methods, or applied differential equations in support of telecommunication systems and wide area networks.